Single-Lugged Bracket 199-C (42.4mm)
Tube Clamp or Pipe Clamps for 42.4mm tube. This malleable iron casting is also available in 48.3mm & 33.7mm tube clamps Complies with B.S. EN1461. And are also known by the term Key Clamps.
To secure this fixing you can use an M10 through bolt OR a 10mm frame fixing
|Allen Key Size
Often used for mounting boards practically flush with tubes. Fixing holes suit a wide range of common mechanical and chemical masonry anchors. The tube cannot be joined within the fitting.
|Equivalent product|| |
| Fast Clamp
We do not recommend pre-drilling as there can be irregularities in casting that can produce small variations in the size of the holes.
All clamps come with stainless steel grub screws fitted. If full tightened using a ratchet key to a torque of 4.1kg/m (29ft/lb), the grub screw is capable of withstanding an applied slipload of 900kg